« previous next »
Pages: [1]   Go Down

Author Topic: Need help with 04 kx250  (Read 5365 times)

0 Members and 1 Guest are viewing this topic.

Offline Sherland

  • Newbie
  • *
  • Posts: 1
Need help with 04 kx250
« on: June 22, 2015, 11:56:22 AM »
I replaced my piston in my kx250 and put everything back on my resemble which I'm pretty sure I did correctly. The problem began when I went to start it no joy. Initially when I open the petcock it was pissing fuel from the drain so I laid it on its side to let it drain out and picked it back up. I also taped the bowl just in case the float was stuck. I also have a new work plug in it. When I kicked it over it still won't start but I'm getting fuel dropping out the where the exhaust n head meet. I also removed the plug and kicked it over a few time to try n get all the excess fuel out but still getting the leak from the exhaust portion. I feel like I'm missing something small n it's kicking my ass any thing else I can do. I'm pretty much lost at this point. But I'm pretty sure on my reassemble I did it right n the position is in the right position.
Logged

Offline b4himdude

  • Sr. Member
  • ****
  • Posts: 275
  • You gotta love to tinker
Re: Need help with 04 kx250
« Reply #1 on: June 22, 2015, 03:35:34 PM »
taped the bowl????? sounds bloke you have a dirty carburetor.super dirty. something sticking the float valve wide open and its not able to get out of the carb fast enough or at all. so the only place left is the cylinder . thats just a guess though. i dont know why you would tape the bowl.  . clean the carb is a good start. totally go through your carb. thats where the fuel has to go 1st. unless you just ran a fuel hose straight from the tank to the plug hole. im doubting that........
« Last Edit: June 22, 2015, 03:38:50 PM by b4himdude »
Logged
hell ,i,m so broke . if it cost a nickle to take a s**t, id have to puke.....

Offline SHLEPY

  • Big Member
  • Sr. Member
  • ****
  • Posts: 443
Re: Need help with 04 kx250
« Reply #2 on: June 22, 2015, 03:47:28 PM »
Clean that filthy pig.
Logged

Offline b4himdude

  • Sr. Member
  • ****
  • Posts: 275
  • You gotta love to tinker
Re: Need help with 04 kx250
« Reply #3 on: June 22, 2015, 03:59:21 PM »
EXACTLYEXACTLYEXACTLY
Logged
hell ,i,m so broke . if it cost a nickle to take a s**t, id have to puke.....

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Need help with 04 kx250
« Reply #4 on: June 22, 2015, 04:23:23 PM »
Like really clean?



Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Enginerd

  • Full Member
  • ***
  • Posts: 132
  • Big Bore Addict!
Re: Need help with 04 kx250
« Reply #5 on: June 22, 2015, 04:43:46 PM »
Quote from: sandblaster on June 22, 2015, 04:23:23 PM
Like really clean?


Sandblaster is such a Show-off!  :-D
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Need help with 04 kx250
« Reply #6 on: June 22, 2015, 04:57:56 PM »
You gotta love it though  :-P
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline b4himdude

  • Sr. Member
  • ****
  • Posts: 275
  • You gotta love to tinker
Re: Need help with 04 kx250
« Reply #7 on: June 22, 2015, 05:04:33 PM »
well when you have a an super duper aqua cleaning machine you can throw your rear tire in with your tighty whiteys and and everything comes out streak free. im just jealous.... :evil:
Logged
hell ,i,m so broke . if it cost a nickle to take a s**t, id have to puke.....

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Need help with 04 kx250
« Reply #8 on: June 22, 2015, 05:13:00 PM »
Bring your parts over.
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline b4himdude

  • Sr. Member
  • ****
  • Posts: 275
  • You gotta love to tinker
Re: Need help with 04 kx250
« Reply #9 on: June 22, 2015, 05:25:47 PM »
next time passing through oregon  in my way to see my brothers in washington  ill be wondering if i should or if i shouldnt....
Logged
hell ,i,m so broke . if it cost a nickle to take a s**t, id have to puke.....

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Need help with 04 kx250
« Reply #10 on: June 22, 2015, 05:27:56 PM »
Of course you should.
Just let me know when your coming.
Remove your seals and bearings.
Degrease your parts, toss them in the cabinet, and blast them.
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline b4himdude

  • Sr. Member
  • ****
  • Posts: 275
  • You gotta love to tinker
Re: Need help with 04 kx250
« Reply #11 on: June 22, 2015, 05:41:52 PM »
one engine a year is my plan. one up one down. then so on so forth. thats the plan anyway. fingers crossed
Logged
hell ,i,m so broke . if it cost a nickle to take a s**t, id have to puke.....
Pages: [1]   Go Up
« previous next »