« previous next »
Pages: [1]   Go Down

Author Topic: Having a hard time finding gold rims  (Read 3952 times)

0 Members and 1 Guest are viewing this topic.

Offline dpavelko

  • Jr. Member
  • **
  • Posts: 36
Having a hard time finding gold rims
« on: February 16, 2015, 12:51:09 AM »
I am having a hard time finding gold rims for my bike.
The rear if a 86 KX500 and the front end is a 1993 Kx500. Any ideas ?
Logged

Offline karlosthejackel

  • Jr. Member
  • **
  • Posts: 39
Re: Having a hard time finding gold rims
« Reply #1 on: February 22, 2015, 12:54:05 AM »
Ive just made my own as I had similar issues. I had a pair of excel rims only in 18" and 21" that I got cheap but they were straight. Then ive been sourcing hubs. As the 500 uses same hubs from 125/250 of different years I managed to source a damaged front wheel from a 125 here in the UK cheap with a good hub and alward on here has got me a rear hub. Ive had the rims powder coated gold,got some spokes and am about to build them up. Powder coating is not to everyones satisfaction but there is the option of having them anodised. They have cost me about £300 inc bearings. I have kept the original wheels from my bike but you also have the option of doing your originals which will be the cheapest way!
Gold do look great.
« Last Edit: February 22, 2015, 01:02:51 AM by karlosthejackel »
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Having a hard time finding gold rims
« Reply #2 on: February 22, 2015, 02:23:43 AM »
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline dpavelko

  • Jr. Member
  • **
  • Posts: 36
Re: Having a hard time finding gold rims
« Reply #3 on: February 22, 2015, 05:20:57 AM »
Warp 9 does not have them listed for the 86 rear
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Having a hard time finding gold rims
« Reply #4 on: February 22, 2015, 07:43:52 AM »
Warp 9 does not list everything they have and what all it will fit.
I'd contact Alward25 and ask him to check for you:

http://www.kxriders.com/forums/index.php?action=profile;u=1752

If he is too busy, let me know and I will check for you.
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: Having a hard time finding gold rims
« Reply #5 on: February 23, 2015, 02:32:08 AM »
what about Talon?....couldn't hurt to send them an e-mail, they may be able to help as well...

http://www.talon-eng.co.uk/product-type/hubs-wheels/
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline LukeG

  • Full Member
  • ***
  • Posts: 166
Re: Having a hard time finding gold rims
« Reply #6 on: February 23, 2015, 08:02:48 AM »
Rad manufacturing have a lot of different hub options.
Logged
1990 KX250 - Wanna be road racer!
2007 DRZ 462 Motard

Offline dpavelko

  • Jr. Member
  • **
  • Posts: 36
Re: Having a hard time finding gold rims
« Reply #7 on: February 23, 2015, 01:01:28 PM »
i contacted warp 9 and they will fit my application!
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Having a hard time finding gold rims
« Reply #8 on: February 23, 2015, 01:16:28 PM »
Thought so.. :lol:
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.
Pages: [1]   Go Up
« previous next »