« previous next »
Pages: [1]   Go Down

Author Topic: Help needed. Rear shock valve diagram!  (Read 4560 times)

0 Members and 1 Guest are viewing this topic.

Offline dpavelko

  • Jr. Member
  • **
  • Posts: 36
Help needed. Rear shock valve diagram!
« on: January 11, 2015, 09:38:51 AM »
I was rebuilding my rear shock and had my valve out placed as I took it out. Low and behold I went to hammer something on the work bench and the sequence of the washers for the valve all scattered. Anywhere I can see the sequence? I checked the microfiche but it does not break that part down :/
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Help needed. Rear shock valve diagram!
« Reply #1 on: January 11, 2015, 09:54:33 AM »
What year?
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline dpavelko

  • Jr. Member
  • **
  • Posts: 36
Re: Help needed. Rear shock valve diagram!
« Reply #2 on: January 11, 2015, 10:35:34 AM »
1986

 :cry:
« Last Edit: January 11, 2015, 01:03:40 PM by dpavelko »
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Help needed. Rear shock valve diagram!
« Reply #3 on: January 11, 2015, 03:02:30 PM »
Bummer.... I only have some limited info for the newer shocks.. 97-04
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline alward25

  • Hero Member
  • *****
  • Posts: 1,349
Re: Help needed. Rear shock valve diagram!
« Reply #4 on: January 11, 2015, 03:44:02 PM »
I just rebuilt an 87, did not take pics,  blaster had a 91 that looked about the same, might help
Logged
"Let there be light"

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Help needed. Rear shock valve diagram!
« Reply #5 on: January 11, 2015, 04:19:54 PM »
I have no internal info on the 91 shock but I do have some limited info on my Race Tech shock rebuild for the 97-04 here:

http://www.oem-cycle.com/forum/viewtopic.php?f=5&t=677
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline alward25

  • Hero Member
  • *****
  • Posts: 1,349
Re: Help needed. Rear shock valve diagram!
« Reply #6 on: January 11, 2015, 05:49:08 PM »
Quote from: sandblaster on January 11, 2015, 04:19:54 PM
I have no internal info on the 91 shock but I do have some limited info on my Race Tech shock rebuild for the 97-04 here:

http://www.oem-cycle.com/forum/viewtopic.php?f=5&t=677

I know there may or may not be a 91 shock in your inventory :wink:
Calling pro action or one of those places might have something to help
Logged
"Let there be light"

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: Help needed. Rear shock valve diagram!
« Reply #7 on: January 11, 2015, 07:33:28 PM »
Yes, there are two 91-93 shocks in my inventory.
Are you volunteering to pull them apart and reassemble them to get shim stack info?
If so I'll order up a couple of seal heads and have you swap them out while your in there  :-D
In fact, I have many other shocks I could send you so you can get the shim stack info.  :evil:

Good call on calling Pro Action.
They may not mind giving out the stock shock shim stack info.
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline dpavelko

  • Jr. Member
  • **
  • Posts: 36
Re: Help needed. Rear shock valve diagram!
« Reply #8 on: January 12, 2015, 01:09:40 AM »
Thanks Guys. I think my best bet may just be getting another shock for spare parts anyhow. Ill keep an eye out on eBay. I'll try and give Pro-Action a call today.
Logged

Offline alward25

  • Hero Member
  • *****
  • Posts: 1,349
Re: Help needed. Rear shock valve diagram!
« Reply #9 on: January 12, 2015, 01:38:31 AM »
Quote from: sandblaster on January 11, 2015, 07:33:28 PM
Yes, there are two 91-93 shocks in my inventory.
Are you volunteering to pull them apart and reassemble them to get shim stack info?
If so I'll order up a couple of seal heads and have you swap them out while your in there  :-D
In fact, I have many other shocks I could send you so you can get the shim stack info.  :evil:

Good call on calling Pro Action.
They may not mind giving out the stock shock shim stack info.

I will rebuild and get all the info you need.  I have all the right tools, and a hookup for sue soon parts too.  Also a heck of a good camera.
Logged
"Let there be light"

Offline dpavelko

  • Jr. Member
  • **
  • Posts: 36
Re: Help needed. Rear shock valve diagram!
« Reply #10 on: January 12, 2015, 01:36:27 PM »
Pro Action would not share the info, but they offered to assemble and rebuild it
Logged
Pages: [1]   Go Up
« previous next »