« previous next »
Pages: [1]   Go Down

Author Topic: Shorter Kickstarter Lever.  (Read 2550 times)

0 Members and 1 Guest are viewing this topic.

Offline jamex

  • Jr. Member
  • **
  • Posts: 31
Shorter Kickstarter Lever.
« on: January 11, 2015, 07:33:22 PM »
After doing Larry's decompression mod, my bike starts like a dream, I noticed Brute asked in Larry's post if anybody had tried fitting a shorter kickstarter lever, has anybody? I have also considered this, is there some other shorter lever available that will fit onto the splined knuckle?
Logged
Man Was Made From Dirt & To Dirt He Shall Return.

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: Shorter Kickstarter Lever.
« Reply #1 on: January 11, 2015, 09:24:39 PM »
not that I'm aware of...the 250's kicker completely encloses the boss and uses a set screw for disassembly, and the 500's kicker has a snap-ring on the top of the boss for disassembly....and the shafts are different as well.

here's the 250...


here's the 500...


this doesn't mean you couldn't find another kicker from a completely different bike and be lucky enough for it to work.
maybe another member might know.
« Last Edit: January 12, 2015, 02:56:57 AM by Foxx4Beaver »
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline wierdo

  • Full Member
  • ***
  • Posts: 131
Re: Shorter Kickstarter Lever.
« Reply #2 on: January 12, 2015, 04:26:21 PM »
have a look at a honda cr kick starters, i have bought a 90's cr250 (longer) to put on my sons 96 cr125 (shorter) i had to separate the levers off the knuckles, and ended up with a 125 knuckle and a 250 lever, worked well..
Logged
Pages: [1]   Go Up
« previous next »