Author Topic: Stabilizer ?  (Read 3729 times)

0 Members and 1 Guest are viewing this topic.

Offline machine

  • Sr. Member
  • ****
  • Posts: 250
Stabilizer ?
« on: February 11, 2005, 08:31:16 AM »
Do any of you guys ride with a GPR stabilizer?

I was thinking of getting one!

Any do's/dont's?
Any good/bad?

thanks 4 any info!

Offline gowen

  • Resident Newbie
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,350
  • www.KXRiders.com
Stabilizer ?
« Reply #1 on: February 11, 2005, 07:30:35 PM »
I ride with WER and I'm happy as hell with it, it cut down aobut 75% of my head shake when bumbing and what have you. The only issue I have now is the rear end, as the front end goes in line with there you put it, the rear end now just won't cooperate.

Rowdy-Yates

  • Guest
Stabilizer ?
« Reply #2 on: February 12, 2005, 03:39:59 AM »
Quit going WOT in the sand Gowen! hehehe

Offline Paul

  • Hero Member
  • *****
  • Posts: 1,205
  • Top Dawg
    • KX Riders
Stabilizer ?
« Reply #3 on: February 12, 2005, 06:20:21 AM »
My personal favorite is the Scott's. I would spend the extra for the Scott's but you're going to like the bike more with any stabilizer you get.

mikesmith

  • Guest
Stabilizer ?
« Reply #4 on: February 12, 2005, 07:48:21 AM »
I like my Scotts and recomend it also.

Offline machine

  • Sr. Member
  • ****
  • Posts: 250
Stabilizer ?
« Reply #5 on: February 12, 2005, 01:56:10 PM »
Thakns for all the info guys!
I'm going to go with the GRP.
I've been doing some research, looking at other forums.
And I've read about a few guys that are VERY un-happy with
they're Scotts.

Though I haven't found one person that has anything bad to say
about GRP???  (Yet)

I hope they're right!!!!!!!! :roll:

Thanks again!

mikesmith

  • Guest
Stabilizer ?
« Reply #6 on: February 12, 2005, 09:35:50 PM »
Whatever way you go youll like having a dampner,saved me more than a few times!

Offline gowen

  • Resident Newbie
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,350
  • www.KXRiders.com
Stabilizer ?
« Reply #7 on: February 13, 2005, 03:50:50 AM »
Yes, a dampner is a dampner. They all usally do there job. I was going to go with GPR just cause it was available, but decided I liked WER cause it was/is mounted on the front finder. I don't like bar mounted dampners, just for cosmetic reasons. ;-)

Offline machine

  • Sr. Member
  • ****
  • Posts: 250
Stabilizer ?
« Reply #8 on: February 13, 2005, 04:08:02 AM »
Thanks again guys!
I plan on getting it next week, and I'll let you all know how it work!

Thanks,
Kev...  :D