Author Topic: UK jetting and cold starting  (Read 2812 times)

0 Members and 1 Guest are viewing this topic.

Offline karlosthejackel

  • Jr. Member
  • **
  • Posts: 39
UK jetting and cold starting
« on: April 10, 2014, 06:55:26 PM »
Ive seen the charts but seeing if any UK guys have anything tried and tested. Ive not busted the carb open yet,in fact ive not even ridden the bike as I cant start the thing. Ive bought the jets according to the chart and my elevation which is anywhere between 150-600ft on the different tracks ill be using it on with varying uk temps.
The bike is fresh in from California. Starting wise it gives a backfire now and again and im scared of a kickback so im a bit reserved on giving it some!!. It started 4th or 5th kick when it was delivered by the seller last week and that was without choke from cold and gave a couple back fires before it went. Ive read that a properly set up bike will start well from cold

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: UK jetting and cold starting
« Reply #1 on: April 10, 2014, 07:00:55 PM »
For your elevation take a close look at 55/168
That works well down to 50 degrees F and from 0-1500 ft.
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline karlosthejackel

  • Jr. Member
  • **
  • Posts: 39
Re: UK jetting and cold starting
« Reply #2 on: April 10, 2014, 08:29:29 PM »
Thank you for that. I thought it best I open the carb so I have and it has the following

58 pilot
142 main
N82M needle on clip 3

If I go with your jetting what needle would you recommend?

Many thanks Karl

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: UK jetting and cold starting
« Reply #3 on: April 10, 2014, 08:44:42 PM »
142 main

142??!!...d**n, that's like a sippie cup :-o
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline karlosthejackel

  • Jr. Member
  • **
  • Posts: 39
Re: UK jetting and cold starting
« Reply #4 on: April 10, 2014, 09:00:30 PM »
142 main

142??!!...d**n, that's like a sippie cup :-o

scary stuff. glad ive opened her up now!

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: UK jetting and cold starting
« Reply #5 on: April 10, 2014, 09:02:29 PM »
yeah you could/would very well fry the top-end running a 142.
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: UK jetting and cold starting
« Reply #6 on: April 11, 2014, 03:36:53 AM »
142??? Whoa.... that's a bit small....
I would start with 55/168, stock needle, 3 position to start and I might play with the 2nd position once I verified that it wasn't running lean.
142???? That thing must be pinging like crazy at WOT  :-o
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.