Author Topic: air leak help  (Read 1343 times)

0 Members and 2 Guests are viewing this topic.

Offline Toom038

  • Jr. Member
  • **
  • Posts: 30
air leak help
« on: November 20, 2013, 05:18:53 AM »
Hoping someone could help with an air leak. I found that it is leaking around the seal around the power valve actuating arm. Does the guide (part 349002-1062) install with the o-ring toward the inside of the motor or the seal towards the inside? I had the o-ring towards the outside. Not sure if it is installed wrong or if the seal and o-ring are gacked up. Both parts are new but not the guide. Thanks.
« Last Edit: November 20, 2013, 05:36:43 AM by Toom038 »

Offline Toom038

  • Jr. Member
  • **
  • Posts: 30
Re: air leak help
« Reply #1 on: November 20, 2013, 02:10:58 PM »
Got it figured out. O-ring goes in.