« previous next »
Pages: [1] 2   Go Down

Author Topic: finding the elusive vforce 2 reeds  (Read 12331 times)

0 Members and 1 Guest are viewing this topic.

Offline 81cr450

  • Hero Member
  • *****
  • Posts: 887
finding the elusive vforce 2 reeds
« on: August 17, 2013, 02:34:15 PM »
What jet skis do they fit ?

Doesnt the kx250 have the same manifold pattern, just a smaller high velocity throat ,lowend type in a 500. Like these

http://www.ebay.com/itm/2003-KX250-KX-250-Vforce3-Reeds-Boot-Intake-Cage-Engine-Motor-/400535917714?pt=Motorcycles_Parts_Accessories&fits=Make%3AKawasaki&hash=item5d41cd1492&vxp=mtr

What other options are there?
Logged
if I only had a pair, I could actually ride this thing

& to the people I like  FYYFF

Offline 81cr450

  • Hero Member
  • *****
  • Posts: 887
Re: finding the elusive vforce 2 reeds
« Reply #1 on: August 17, 2013, 02:38:24 PM »
Logged
if I only had a pair, I could actually ride this thing

& to the people I like  FYYFF

Offline Gage

  • Full Member
  • ***
  • Posts: 110
Re: finding the elusive vforce 2 reeds
« Reply #2 on: August 18, 2013, 11:25:49 AM »
I've had no luck on finding any too. Like you, I would like to hear one of the geniuses chime in.
Logged

Offline 81cr450

  • Hero Member
  • *****
  • Posts: 887
Re: finding the elusive vforce 2 reeds
« Reply #3 on: August 26, 2013, 01:42:25 PM »
Just some pics of 2 sets of kx250 vf2's I picked up

Heres you can see part of why vf2's are better, almost like a built in reed spacer



Both of these vf2's were listed for kx250's but one would be better for lowend, particularly in a K5, "the narrower, smaller throated one anyway"
& the other looks like the K5 reeds to me , full width & a gaping maw. Both have DM08 on them, its the only part # I can see anyway





I still would like to get my hands on the jetski reeds too, but I'd need a definitive answer as to what ski. My pics kinda suck if you need better from a certain angle to clarify just holler
« Last Edit: August 26, 2013, 01:46:39 PM by 81cr450 »
Logged
if I only had a pair, I could actually ride this thing

& to the people I like  FYYFF

Offline bansheedave

  • Full Member
  • ***
  • Posts: 85
Re: finding the elusive vforce 2 reeds
« Reply #4 on: August 26, 2013, 01:53:20 PM »
What about v force cages on snowmobiles?
Logged

Offline 81cr450

  • Hero Member
  • *****
  • Posts: 887
Re: finding the elusive vforce 2 reeds
« Reply #5 on: August 26, 2013, 02:01:58 PM »
Logged
if I only had a pair, I could actually ride this thing

& to the people I like  FYYFF

Motorrad

  • Guest
Re: finding the elusive vforce 2 reeds
« Reply #6 on: August 26, 2013, 03:38:06 PM »
the answer is on the site somewhere.   I decoded what ski is the same once...
Logged

Offline bansheedave

  • Full Member
  • ***
  • Posts: 85
Re: finding the elusive vforce 2 reeds
« Reply #7 on: August 26, 2013, 04:23:07 PM »
Quote from: 81cr450 on August 26, 2013, 02:01:58 PM
Kawasaki sno-mobile?  :-o

Actually you read my mind

http://www.ebay.com/itm/Polaris-Twin-VForce-2-Reeds-440-500-600-700-800-XC-RMK-SKS-Switchback-/290904534391?pt=Snowmobile_Parts_Accessories&hash=item43bb42ed77&vxp=mtr

Looks like it could  :? maybe sorta fit with some coersion
I know artic cat uses v force reeds. I'll have to look for the decoded section just mentioned
Logged

Offline RoostiusMaximus

  • Sr. Member
  • ****
  • Posts: 301
    • Millar Racing Engines
Re: finding the elusive vforce 2 reeds
« Reply #8 on: August 30, 2013, 05:09:21 AM »
I'll be listing 6 or so VF2's for sale soon  :wink:
Logged

Offline Pmcg

  • Sr. Member
  • ****
  • Posts: 352
Re: finding the elusive vforce 2 reeds
« Reply #9 on: August 30, 2013, 06:50:15 AM »
Quote from: RoostiusMaximus on August 30, 2013, 05:09:21 AM
I'll be listing 6 or so VF2's for sale soon  :wink:

Ill take a set if they're not all spoken for already.
Logged

Offline cbrfrenzie

  • Full Member
  • ***
  • Posts: 67
Re: finding the elusive vforce 2 reeds
« Reply #10 on: August 30, 2013, 07:54:20 AM »
Quote from: RoostiusMaximus on August 30, 2013, 05:09:21 AM
I'll be listing 6 or so VF2's for sale soon  :wink:
Will these be the cages from the jet ski with kx500 reeds swapped onto them, or true VF2 for the KX500 direct from MT?
Logged

Offline cmotodad

  • Full Member
  • ***
  • Posts: 217
Re: finding the elusive vforce 2 reeds
« Reply #11 on: September 01, 2013, 07:04:02 AM »
Well, I was messing with a Jet Ski motor this morning. It is a 750 with a reed valve. After reading the post about a jet ski reed fitting the KX5, I decided to pull one out and see if it fit. Yes it does. Not sure about anything except the bolt spacing and fitting into the case.
« Last Edit: September 02, 2013, 10:30:12 AM by cmotodad »
Logged

Offline Rd

  • Full Member
  • ***
  • Posts: 114
Re: finding the elusive vforce 2 reeds
« Reply #12 on: September 01, 2013, 01:43:11 PM »
Motodad
I have done the same thing with the jetski reeds. I have a dead Kawasaki 750 motor in my garage currently

Quote
I decoded what ski is the same once...

I think any small pin Kawasaki 750 ski motor has the same reeds
« Last Edit: September 01, 2013, 01:50:52 PM by Rd »
Logged

Offline RoostDaddy

  • Sr. Member
  • ****
  • Posts: 445
Re: finding the elusive vforce 2 reeds
« Reply #13 on: September 03, 2013, 12:23:15 PM »
decoded= 800/750 (carbon-tech HT)

KX250 manifold (rubber boot) is shorter (around'94) putting your carb in closer to the cylinder.

hope this solves some of your search time
Logged
America is all about speed. Hot, nasty, bad-ass speed.

Offline RoostDaddy

  • Sr. Member
  • ****
  • Posts: 445
Re: finding the elusive vforce 2 reeds
« Reply #14 on: September 08, 2013, 11:25:10 AM »
anyone remember the rubberized reed cage Kawrider was messing with?  not sure what it was out of, but I remember chatting with him quite a while ago before things went down hill.
Logged
America is all about speed. Hot, nasty, bad-ass speed.
Pages: [1] 2   Go Up
« previous next »