Author Topic: Front fender ? (Read 3829 times)

machine · « **on:** December 05, 2004, 07:57:17 AM »

Is there any up-grades for the front fender of the 04' KX5?
And if so, is there much fitting, or trimming???

Ramski · « **Reply #1 on:** December 05, 2004, 10:53:58 AM »

I've seen some run the newer KX250 front fenders which actually look nice. Also seen a guy use the KX250 front number plate. You just have to make a small L bracket for the top bolt on the number plate.

BigKX · « **Reply #2 on:** December 07, 2004, 03:39:16 AM »

Depending on the numberplate you use, you may have to trim the plate itself. The fender will bolt up fine. It looks sweet.

machine · « **Reply #3 on:** December 07, 2004, 01:35:38 PM »

Do you guys know what year KX250 it's from?

mikesmith · « **Reply #4 on:** December 07, 2004, 08:06:16 PM »

'03,'04,'05!

machine · « **Reply #5 on:** December 08, 2004, 03:06:47 AM »

Thanks guyzzzz!!!!!!!!!!

Rick · « **Reply #6 on:** December 08, 2004, 10:08:58 AM »

I bolted the newer front fender to the 2002 125, and used a stock number plate. All that was required was a little heat from a hair dryer to reshape the number plate. However, I like the idea of using the new style number plate and an L bracket. When I switch to the new fender on the 500, this will not be a problem, as I run a front headlight. so no clearing problem.

Rick

Author Topic: Front fender ? (Read 3829 times)

BigKX

mikesmith

Rick