« previous next »
Pages: [1]   Go Down

Author Topic: stuck trying to rebuild engine.  (Read 3208 times)

0 Members and 1 Guest are viewing this topic.

Offline mbrouk

  • Jr. Member
  • **
  • Posts: 35
stuck trying to rebuild engine.
« on: July 08, 2013, 01:10:55 PM »
OK so I'm rebuilding my entire bike and I'm stuck trying to get my engine back together but you guys always come thru! So I'm just trying to get the engine back together and there's a 12mm nut the holds my stator to my crank....I can't get it back on. I stripped the first nut, ordered an OEM one and now this one doesn't want to go on. The threads on my crank do not look stripped wtf is going on??
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: stuck trying to rebuild engine.
« Reply #1 on: July 08, 2013, 01:42:42 PM »
Your threads may have a burr or may be slightly smutched....
If you have the correct die you can chase the threads.
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline mbrouk

  • Jr. Member
  • **
  • Posts: 35
Re: stuck trying to rebuild engine.
« Reply #2 on: July 08, 2013, 01:48:34 PM »
Yeah thanks sand, I took a close look and it does look like the threads are barely smudged. Well I guess I'll be getting a 12mm die but I wonder what the thread spacing is. I check OEM and it doesn't say, Idk if its .75 1 1.25 1.50 1.75 or what.  :-(  hope I don't end up having to split the case and putting a crank in .
Logged

Offline mbrouk

  • Jr. Member
  • **
  • Posts: 35
Re: stuck trying to rebuild engine.
« Reply #3 on: July 08, 2013, 01:50:48 PM »
On the bright side my frame has a fresh powdercoat on it  :mrgreen:
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: stuck trying to rebuild engine.
« Reply #4 on: July 08, 2013, 01:55:24 PM »
If nobody knows the thread pitch I can check for you tomorrow if you remind me.... I have a lot happening tomorrow.
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline mbrouk

  • Jr. Member
  • **
  • Posts: 35
Re: stuck trying to rebuild engine.
« Reply #5 on: July 08, 2013, 02:30:40 PM »
I totally understand sand I work lots of hours and have a baby boy and appreciate all the help you've ever given me. Some on you guys help us out more than you realize I think. I've saved lots of time and money because of the guy's on here.
Logged

Motorrad

  • Guest
Re: stuck trying to rebuild engine.
« Reply #6 on: July 09, 2013, 02:27:44 PM »
a thread file is your friend.    much safer to use than running a die over it.
Logged

Offline mbrouk

  • Jr. Member
  • **
  • Posts: 35
Re: stuck trying to rebuild engine.
« Reply #7 on: July 10, 2013, 11:01:57 AM »
Its too late lol I stripped my crank threads so I'm probably going to be buying a whole new crank assembly now.  :cry:   now the question is....should I stroke it?? Haha
Logged
Pages: [1]   Go Up
« previous next »