Author Topic: Clutch arm length  (Read 2159 times)

0 Members and 1 Guest are viewing this topic.

Offline conbread

  • Full Member
  • ***
  • Posts: 97
Clutch arm length
« on: June 01, 2013, 12:59:19 PM »
can someone measure the clutch arm from front to back outside to outside and tell me how long it is.. trying to see if mine has had the 5mm trick done to it... thanks guys..

Offline KXDINO

  • Hero Member
  • *****
  • Posts: 630
Re: Clutch arm length
« Reply #1 on: June 01, 2013, 02:06:40 PM »
k5 =54.3 mm

Offline conbread

  • Full Member
  • ***
  • Posts: 97
Re: Clutch arm length
« Reply #2 on: June 01, 2013, 04:17:23 PM »
thanks buddy

Offline conbread

  • Full Member
  • ***
  • Posts: 97
Re: Clutch arm length
« Reply #3 on: June 02, 2013, 02:48:59 AM »
just checked mine and its 60.35

Offline KXDINO

  • Hero Member
  • *****
  • Posts: 630
Re: Clutch arm length
« Reply #4 on: June 02, 2013, 08:47:25 AM »
Yes i went back to the stock one because the lengthen one was worn out,but i use a different perch and lever to make it easier to pull in,seems to work fine,i did have the gearbox etc all polished inside to make it change gear easier ,that helps,plus a kx250 07 gear lever which is about 5mm longer to help with the swing of things,just as well you dont have to use the clutch much on a k5.