« previous next »
Pages: 1 ... 16 17 [18] 19 20 ... 25   Go Down

Author Topic: 2 piece clutch cover  (Read 156955 times)

0 Members and 8 Guests are viewing this topic.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2 piece clutch cover
« Reply #255 on: March 06, 2014, 05:54:28 PM »
Your success is most likely due to your aluminum welding skills.
I have none... My welding buddy does not weld aluminum very well but he tries  :-)
This may be over kill... then again maybe not... My adapter is only 1/4" thick...
I'm sure Larry, Motorrad, or some of the others here could do it but I have to make due with what I have to work with.
I even thought about using my clutch cover as the fixture but decided it wouldn't be stable enough... Again, I'm sure this is over kill but I want to give this project every chance of success.
I have 3 clutch covers that need to be fixed, I'd like to be set and ready to go from the very first try.
Who knows, perhaps I'll offer a finished product if I get good enough so as to bring down the cost  :-o
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline cmotodad

  • Full Member
  • ***
  • Posts: 217
Re: 2 piece clutch cover
« Reply #256 on: March 06, 2014, 06:05:05 PM »
I had a friend weld for me. Maybe a bad case half would be good to secure to while welding. I have one but did not think to use it. Thanks for the great parts.
« Last Edit: March 13, 2014, 11:47:58 AM by cmotodad »
Logged

Offline Goat

  • Hero Member
  • *****
  • Posts: 785
  • Ride it like you stole it!
Re: 2 piece clutch cover
« Reply #257 on: March 09, 2014, 01:44:00 AM »
I have a set of junk case halves if they are needed. I just keep them around for frame mockups.
Logged
Quote from: Danger4u2 on June 17, 2010, 01:36:16 AM
It's hard to keep a drivers license riding a 2 stroke dirt bike on the street.  If you drive within the law they are VERY boring.

Offline Dutch-K5 Fan

  • Hero Member
  • *****
  • Posts: 759
Re: 2 piece clutch cover
« Reply #258 on: March 10, 2014, 08:51:54 AM »
Found this cover https://picasaweb.google.com/102067261144953476086/ClutchCovers#5989268830144816242

(Still try to find how to post pics from picasa.)

It's From Paul Malins KX500SR in 1991. It has "the" elbow of the cylinder on the water pipe wich than runs to the rear of the cylinder.
Does anybody knows wich cover this could be?

Dutchie
« Last Edit: March 10, 2014, 09:05:42 AM by Dutch-K5 Fan »
Logged
Proud owner of a KX500AF

Offline motopunk

  • Hero Member
  • *****
  • Posts: 1,150
    • www.der-motopunk.de.tl
Re: 2 piece clutch cover
« Reply #259 on: March 10, 2014, 09:25:20 AM »


looks a little bit like a 125 outer cover... but at least i think it is full factory... by the way, i dream to have one of these factory pipes...  :-D




dutchie click with the right mouse button on the pic .than on the list click "grafik info". copy the link and you can post the pic directly here with the insert-image function...  :wink:
« Last Edit: March 10, 2014, 09:28:35 AM by motopunk »
Logged
big 2 stroke bikes are weapons for real men, who donīt fear death or devil. ;O)
ī83 kx250, ī87 kx250 (with 360 big bore), 87 kx500, ī93 kx500 sfc

---  www.der-motopunk.de.tl  ---

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2 piece clutch cover
« Reply #260 on: March 13, 2014, 11:15:26 AM »
Here is the test adapter bolted to the jig as it is back from surface grind to make sure it's flat.



Here we are ready for weld.

Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2 piece clutch cover
« Reply #261 on: March 18, 2014, 11:45:54 AM »
Finally got the clutch cover adapter off to the weld shop today....
I should have it back within a week or so...
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Motorrad

  • Guest
Re: 2 piece clutch cover
« Reply #262 on: March 18, 2014, 12:21:27 PM »
Quote from: sandblaster on March 18, 2014, 11:45:54 AM
Finally got the clutch cover adapter off to the weld shop today....
I should have it back within a week or so...

which weld shop  :|
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2 piece clutch cover
« Reply #263 on: March 18, 2014, 12:55:17 PM »
Seagull express welding services :roll:
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Motorrad

  • Guest
Re: 2 piece clutch cover
« Reply #264 on: March 18, 2014, 01:03:27 PM »
Quote from: sandblaster on March 18, 2014, 12:55:17 PM
Seagull express welding services :roll:

EEEK
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2 piece clutch cover
« Reply #265 on: March 18, 2014, 01:18:41 PM »
How will he get better if I don't let him poop on my parts once in a while?
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Goat

  • Hero Member
  • *****
  • Posts: 785
  • Ride it like you stole it!
Re: 2 piece clutch cover
« Reply #266 on: March 18, 2014, 03:04:56 PM »
Quote from: sandblaster on March 18, 2014, 01:18:41 PM
How will he get better if I don't let him poop on my parts once in a while?

That seagull should practice on some scrap aluminum not on your clutch cover lol
Logged
Quote from: Danger4u2 on June 17, 2010, 01:36:16 AM
It's hard to keep a drivers license riding a 2 stroke dirt bike on the street.  If you drive within the law they are VERY boring.

Offline Brute

  • Hero Member
  • *****
  • Posts: 862
  • 787 ZA005 GE
Re: 2 piece clutch cover
« Reply #267 on: March 18, 2014, 06:46:01 PM »
Cast aluminum stuff is always iffy, particularly when it has been soaking in oil. Or anything really. Salt water is ugly too with salt crystals imbedded in it. He needs to practice on old crappy cast, not just practice!
Just got my old 1967 Miller 320 AB/P going again Saturday. I lost the HiFreq a while back. Thought it was one thing but turned out to be another. Just glad to get it going again for a couple hundred. Was thinking for a bit that I would have to bag it and either buy another AC Tig or just pay someone to do my stuff.  :x  New inverter ones have some great features and do not weigh much compared to my beast at about 1000 LBS. would clear out a little shop space as well but then again, I own this one.  :-)
Logged
Things Are More Like They Are Today Then They Have Ever Been Before...

Offline motopunk

  • Hero Member
  • *****
  • Posts: 1,150
    • www.der-motopunk.de.tl
Re: 2 piece clutch cover
« Reply #268 on: March 18, 2014, 07:32:19 PM »
Quote from: sandblaster on March 18, 2014, 01:18:41 PM
How will he get better if I don't let him poop on my parts once in a while?

for welding it has to be metallic clean. any little oildrop is not good in the welding area  and also important, the right heat treatment before and after welding...

letīs wait, what you finally get back from the welder...   :wink:  ...
Logged
big 2 stroke bikes are weapons for real men, who donīt fear death or devil. ;O)
ī83 kx250, ī87 kx250 (with 360 big bore), 87 kx500, ī93 kx500 sfc

---  www.der-motopunk.de.tl  ---

Offline RoostiusMaximus

  • Sr. Member
  • ****
  • Posts: 301
    • Millar Racing Engines
Re: 2 piece clutch cover
« Reply #269 on: March 20, 2014, 04:07:33 AM »
blast the case bare with glass, then soda, then bake it on a 10$ walmart hot plate until it smokes out all the crud from the bolt holes. weld it while its hot.  :wink:
Logged
Pages: 1 ... 16 17 [18] 19 20 ... 25   Go Up
« previous next »