Author Topic: KDX220  (Read 22604 times)

0 Members and 1 Guest are viewing this topic.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: KDX220
« Reply #15 on: February 19, 2013, 10:19:36 AM »
I wouldn't use this unless I had really good reason but here is a site for reporting people on C/L and other online selling sites:

http://flakelist.org/
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline E ticket rider

  • Full Member
  • ***
  • Posts: 112
  • Born to lose, live to win
Re: KDX220
« Reply #16 on: February 19, 2013, 10:47:58 AM »
Ill give him a few days, Hes supposed to be moving out of state. I know that can be hectic. I found an '85 CR250 i might go look at.
Give a man a fish and he will eat for a day. Teach him how to fish, and he will sit in a boat and drink beer all day!
Build a man a fire, and he will be warm for a night , Light a man on fire, and he will be warm for the rest of his life!

Offline SS109

  • Full Member
  • ***
  • Posts: 92
  • KDX fanatic!
Re: KDX220
« Reply #17 on: February 20, 2013, 04:38:59 PM »
Yeah, I see that now. However, I wasn't looking at the top of the web page. I was looking at the actual product descriptions. A simple "yes" to my question would have sufficed instead of all the BS. :roll:

The only readily available safe option is a Wiseco forged piston.


Not so...Wossner has 3 sizes readily available for the 220...and they're a far superior product than Wiseco. :wink:

http://www.wossnerpistons.com/products/?car-id=9972&car-name=2001-kawasaki-kdx-220

I'm not tryin to bust your balls by any means,but I also don't want to be looked at as a liar either :-D...but on my computer,when I open that link,the very 1st thing I see staring me in the face are the words "Manufactuer Of Forged Pistons"...dead center at the top...to the left side is the Wossner logo.
Is it just me,or is my computer just that more advanced over SS109s...can anyone else see the headline that states "Manufactuer Of Forged Pistons" at the top of the page when you open this link?

When I get outa work I'll post up a pic of what my computer shows when I open it....maybe your computer is'nt for some reason.
'90 KDX 200 (rebuild - DONE!) - '94 KDX 250 (soon to be a KDX250af)

Offline E ticket rider

  • Full Member
  • ***
  • Posts: 112
  • Born to lose, live to win
Re: KDX220
« Reply #18 on: February 20, 2013, 05:28:00 PM »
UPDATE!
So I get ahold of dude, and hes still in.... out of state. So I have a 'date' with him, or his wife, whatever...on sat, the 23rd?  So, Ima buy this piece of s**t outta spite!! LOL! Ill get him down to a price, and then walk away. then buy it for a lot less.

Any way, I can fix what don't work, lights work, bike runs, suspension bounces, after that...it just shop stuff....right? another project? no problem!!

Something for the boys to work on!!
Give a man a fish and he will eat for a day. Teach him how to fish, and he will sit in a boat and drink beer all day!
Build a man a fire, and he will be warm for a night , Light a man on fire, and he will be warm for the rest of his life!

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: KDX220
« Reply #19 on: February 20, 2013, 08:27:21 PM »
Yeah, I see that now. However, I wasn't looking at the top of the web page. I was looking at the actual product descriptions. A simple "yes" to my question would have sufficed instead of all the BS. :roll:

The only readily available safe option is a Wiseco forged piston.


Not so...Wossner has 3 sizes readily available for the 220...and they're a far superior product than Wiseco. :wink:

http://www.wossnerpistons.com/products/?car-id=9972&car-name=2001-kawasaki-kdx-220

I'm not tryin to bust your balls by any means,but I also don't want to be looked at as a liar either :-D...but on my computer,when I open that link,the very 1st thing I see staring me in the face are the words "Manufactuer Of Forged Pistons"...dead center at the top...to the left side is the Wossner logo.
Is it just me,or is my computer just that more advanced over SS109s...can anyone else see the headline that states "Manufactuer Of Forged Pistons" at the top of the page when you open this link?

When I get outa work I'll post up a pic of what my computer shows when I open it....maybe your computer is'nt for some reason.

eh,it's all good....you'll live :-D
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline SS109

  • Full Member
  • ***
  • Posts: 92
  • KDX fanatic!
Re: KDX220
« Reply #20 on: February 21, 2013, 06:36:41 AM »
Yeah, I see that now. However, I wasn't looking at the top of the web page. I was looking at the actual product descriptions. A simple "yes" to my question would have sufficed instead of all the BS. :roll:

The only readily available safe option is a Wiseco forged piston.


Not so...Wossner has 3 sizes readily available for the 220...and they're a far superior product than Wiseco. :wink:

http://www.wossnerpistons.com/products/?car-id=9972&car-name=2001-kawasaki-kdx-220

I'm not tryin to bust your balls by any means,but I also don't want to be looked at as a liar either :-D...but on my computer,when I open that link,the very 1st thing I see staring me in the face are the words "Manufactuer Of Forged Pistons"...dead center at the top...to the left side is the Wossner logo.
Is it just me,or is my computer just that more advanced over SS109s...can anyone else see the headline that states "Manufactuer Of Forged Pistons" at the top of the page when you open this link?

When I get outa work I'll post up a pic of what my computer shows when I open it....maybe your computer is'nt for some reason.

eh,it's all good....you'll live :-D

Ahhhh, I don't know. My mangina is hurt and full of sand now! :-D
'90 KDX 200 (rebuild - DONE!) - '94 KDX 250 (soon to be a KDX250af)

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: KDX220
« Reply #21 on: February 21, 2013, 06:44:04 AM »
HAHA...that's funny!....just pick up a drunken troller from the bar to flush out the sand and nurse it back to health. ...works for me :evil:
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline SS109

  • Full Member
  • ***
  • Posts: 92
  • KDX fanatic!
Re: KDX220
« Reply #22 on: February 21, 2013, 01:01:16 PM »
Thank you! :-D Ya gotta have a sense of humor or thing just get too uptight! :mrgreen:
'90 KDX 200 (rebuild - DONE!) - '94 KDX 250 (soon to be a KDX250af)

Offline USMC 500

  • Giant Member
  • Hero Member
  • *****
  • Posts: 1,026
  • Sikorsky CH-53E the KX500 of Marine Corps aviation
Re: KDX220
« Reply #23 on: February 21, 2013, 02:44:04 PM »
buy it.......put a 500 in it........KDX500 enduro bike is something everyone should have.......service honda makes one but they want like $13,000
I once heard my buddy Bill ask Danny Hamel after a race....
"How can someone who looks like a high school band tuba player go so d**n fast on a bike?!"

Motorrad

  • Guest
Re: KDX220
« Reply #24 on: February 21, 2013, 02:49:58 PM »
buy it.......put a 500 in it........KDX500 enduro bike is something everyone should have.......service honda makes one but they want like $13,000

I can build ya a K5 motor that would run like a Tame KDX..   would be like a 500CC KDX.    good tame and TORQUE

Offline USMC 500

  • Giant Member
  • Hero Member
  • *****
  • Posts: 1,026
  • Sikorsky CH-53E the KX500 of Marine Corps aviation
Re: KDX220
« Reply #25 on: February 21, 2013, 02:55:43 PM »
buy it.......put a 500 in it........KDX500 enduro bike is something everyone should have.......service honda makes one but they want like $13,000

I can build ya a K5 motor that would run like a Tame KDX..   would be like a 500CC KDX.    good tame and TORQUE

Tame to you is 85 hp and below......
I once heard my buddy Bill ask Danny Hamel after a race....
"How can someone who looks like a high school band tuba player go so d**n fast on a bike?!"

Motorrad

  • Guest
Re: KDX220
« Reply #26 on: February 21, 2013, 02:56:22 PM »
buy it.......put a 500 in it........KDX500 enduro bike is something everyone should have.......service honda makes one but they want like $13,000

I can build ya a K5 motor that would run like a Tame KDX..   would be like a 500CC KDX.    good tame and TORQUE

Tame to you is 85 hp and below......

well.....

Offline USMC 500

  • Giant Member
  • Hero Member
  • *****
  • Posts: 1,026
  • Sikorsky CH-53E the KX500 of Marine Corps aviation
Re: KDX220
« Reply #27 on: February 21, 2013, 03:00:27 PM »
Motorrad's idea of a "TAME" enduro bike......

http://www.youtube.com/watch?v=uj4sGXGjh3s
I once heard my buddy Bill ask Danny Hamel after a race....
"How can someone who looks like a high school band tuba player go so d**n fast on a bike?!"

Offline E ticket rider

  • Full Member
  • ***
  • Posts: 112
  • Born to lose, live to win
Re: KDX220
« Reply #28 on: February 21, 2013, 04:15:58 PM »
I do have a 500......... :-o
Give a man a fish and he will eat for a day. Teach him how to fish, and he will sit in a boat and drink beer all day!
Build a man a fire, and he will be warm for a night , Light a man on fire, and he will be warm for the rest of his life!

Offline Friar-Tuck

  • Hero Member
  • *****
  • Posts: 1,827
  • \o/ Live Free or Die
Re: KDX220
« Reply #29 on: February 22, 2013, 05:12:34 AM »
"The Truth Has No Agenda"