Author Topic: NO spark????  (Read 10283 times)

0 Members and 1 Guest are viewing this topic.

Offline machine

  • Sr. Member
  • ****
  • Posts: 250
NO spark????
« Reply #30 on: October 18, 2004, 05:19:33 AM »
That bike rips!!! I wish I had bought one a long time ago!

Well this is what happend....
The bike rode great for about 10 miles, then started to get hard to start.
Then I rode another 10, and it kepped dieing after the 20 mile mark????

Got it back to the house, and checked the plug.
Lots of spark?
Put in back in, and it fired right up??
Them rode it 2 blocks and it started dieing again???

Very odd????  :?

mikesmith

  • Guest
NO spark????
« Reply #31 on: October 18, 2004, 05:23:39 PM »
Check the flywheel again,maybe they didnt tighten it up or something?A new plugs not ever a bad idea.

Offline machine

  • Sr. Member
  • ****
  • Posts: 250
NO spark????
« Reply #32 on: October 19, 2004, 11:49:56 AM »
The plug was sparking great!
well at least when I had it out of the motor!

Guess I need to take it back....

Offline gowen

  • Resident Newbie
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,350
  • www.KXRiders.com
NO spark????
« Reply #33 on: October 20, 2004, 05:07:39 AM »
Quote from: gowen
I bet they did NOT tighten the nut on the flywheel. Use red locktite.


Yup. It would spark fine, but the TIMING of the spark would be off, in other words, would be firing at the wrong time. I had the same issue and ended up using red lock tite and an air impact driver to keep it on. :-)

Offline KXcam22

  • Hero Member
  • *****
  • Posts: 1,677
NO spark????
« Reply #34 on: October 20, 2004, 07:08:11 AM »
Gabe,
  Would it help lapping the flywheel to the crank with some valve grinding compound?  I've heard of this frequently but not had to do it (yet).  I agree, lots of red locktite also will always help. Cam.

Offline gowen

  • Resident Newbie
  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1,350
  • www.KXRiders.com
NO spark????
« Reply #35 on: October 20, 2004, 07:34:06 AM »
Yes, or some steel wool to get rid of the polishing effect, but I still suggest using an impact as the 500 has some serious power in that crank. :-)