« previous next »
Pages: 1 ... 4 5 [6] 7 8 9   Go Down

Author Topic: What 2-Stroke oil do you use?  (Read 60141 times)

0 Members and 5 Guests are viewing this topic.

Offline concave3

  • Full Member
  • ***
  • Posts: 57
Re: What 2-Stroke oil do you use?
« Reply #75 on: September 05, 2011, 05:28:38 AM »
Quote from: DeadRinger on August 31, 2011, 02:25:19 PM
Motol 800 approved for catalytic converters. 100% synthetic Thats what I always run. Rotory guys put a little in to lube there apex seals.

yea I run this in my kx 250... my friend has streetport 91 rx7, after we rebuilt hes been putting a little in each tank... good stuff in my opinion!
Logged
rallyripper

Motorrad

  • Guest
Re: What 2-Stroke oil do you use?
« Reply #76 on: August 02, 2012, 05:34:04 PM »
Dragging this one back up..


My main mix oil I was using is getting VERY hard to get local..     so going to change..  not worth the PITA it is to get it.


Anyone play with MOtul 800 ? 

(also how does it smell?   haha Yea I know... but thats the reason I dont run KLOTZ... cant stand to be around the bike)
« Last Edit: August 02, 2012, 05:39:07 PM by Motorrad »
Logged

Offline cobbs

  • Full Member
  • ***
  • Posts: 103
Re: What 2-Stroke oil do you use?
« Reply #77 on: August 02, 2012, 06:01:37 PM »
I use Champion, Water pumper 2stroke oil and its great its synthetic and burns really clean good stuff at a great price if you buy it by the gallon I used to to run silkolen and klots but I like Champion the best of the three
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: What 2-Stroke oil do you use?
« Reply #78 on: August 02, 2012, 06:32:44 PM »
Been playing with Maxima's Castor 927 and Torco's GP-7.
I use to use redline but since I don't sell it.... :-D
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Motorrad

  • Guest
Re: What 2-Stroke oil do you use?
« Reply #79 on: August 02, 2012, 06:54:42 PM »
Quote from: sandblaster on August 02, 2012, 06:32:44 PM
Been playing with Maxima's Castor 927 and Torco's GP-7.
I use to use redline but since I don't sell it.... :-D

I ran Castor 927 for YEARS AND YEARS..      

seriously thinking of swapping back to it... Only reason I dont... is it falls out of suspension in heavy avgas mix (lower Specific gravity fuels)  (that I run from time to time when I get heavy handed in my fuel mixing)
« Last Edit: August 02, 2012, 07:20:22 PM by Motorrad »
Logged

Offline Polar-Bus

  • Hero Member
  • *****
  • Posts: 1,023
Re: What 2-Stroke oil do you use?
« Reply #80 on: August 03, 2012, 04:32:20 AM »
Quote from: Motorrad on August 02, 2012, 05:34:04 PM
Dragging this one back up..


My main mix oil I was using is getting VERY hard to get local..     so going to change..  not worth the PITA it is to get it.


Anyone play with MOtul 800 ? 

(also how does it smell?   haha Yea I know... but thats the reason I dont run KLOTZ... cant stand to be around the bike)

 lets put this bad smell issue to bed, from now on run this stuff :



Your bike will smell like McDonalds french fries.   BWAAA-HAAAAA   :-D

Logged
01' KX500
'84 GPz1100
'87 GSX-R  750
'06 HD Fatboy
'73 Kawi H1
'03 CRG KX500 Shifter kart

Offline cobbs

  • Full Member
  • ***
  • Posts: 103
Re: What 2-Stroke oil do you use?
« Reply #81 on: August 03, 2012, 05:30:39 AM »
bad smell? I love the way all 2 stroke oil smells but I don't think I would be to fond of a French fry smelling bike
Logged

Offline snoopjonnyjon

  • Sr. Member
  • ****
  • Posts: 276
Re: What 2-Stroke oil do you use?
« Reply #82 on: August 03, 2012, 06:21:16 AM »
I had always had great luck with Belray MC1 in straight 100LL avgas. I tried using 927 last year, and had no end of issues with it separating from the gas in my KX500, and then plugging the carb. I will be switching back to MC1. Luckily I seem to get by fine using the 927 in my RZ350 since it has oil injection. I am running 100/130 avgas in that bike.
Logged

Motorrad

  • Guest
Re: What 2-Stroke oil do you use?
« Reply #83 on: August 03, 2012, 06:26:37 AM »
Quote from: snoopjonnyjon on August 03, 2012, 06:21:16 AM
I had always had great luck with Belray MC1 in straight 100LL avgas. I tried using 927 last year, and had no end of issues with it separating from the gas in my KX500, and then plugging the carb. I will be switching back to MC1. Luckily I seem to get by fine using the 927 in my RZ350 since it has oil injection. I am running 100/130 avgas in that bike.

I think Im going to take a good hard look at Motul 800..  really like it on paper.  and should mix fine

Flashpoint same (actually a bit higher) than Castor 927.      so that is good for me (WOT dunes/desert guys)

Main reason I stay away from alot of oils... they have flashpoints lower than the CHT's these bikes run at    :-o



I still run castor 927 in my bikes I dont run ALOT of avgas through..    as I SWEAR by castor 927... but as you know snoop.. it falls out in heavy mix's of 100LL  :cry:
Logged

Motorrad

  • Guest
Re: What 2-Stroke oil do you use?
« Reply #84 on: August 03, 2012, 12:13:15 PM »
Quote from: Polar-Bus on August 03, 2012, 04:32:20 AM
Quote from: Motorrad on August 02, 2012, 05:34:04 PM
Dragging this one back up..


My main mix oil I was using is getting VERY hard to get local..     so going to change..  not worth the PITA it is to get it.


Anyone play with MOtul 800 ? 

(also how does it smell?   haha Yea I know... but thats the reason I dont run KLOTZ... cant stand to be around the bike)

 lets put this bad smell issue to bed, from now on run this stuff :



Your bike will smell like McDonalds french fries.   BWAAA-HAAAAA   :-D



Too bad I run gas... not Petrol..
http://www.youtube.com/watch?v=TOCnDczYvw4
Logged

Motorrad

  • Guest
Re: What 2-Stroke oil do you use?
« Reply #85 on: August 04, 2012, 09:13:36 AM »
My wife convinced me to buy some blenzall castor oil.  To see if it will work in her essential oil candle.   

Sweet
Logged

Motorrad

  • Guest
Re: What 2-Stroke oil do you use?
« Reply #86 on: August 04, 2012, 11:21:58 AM »
Just opened a bottle of Motul 800 for the first time


First impressions..


looks and smells like thick ATF
Logged

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: What 2-Stroke oil do you use?
« Reply #87 on: August 04, 2012, 11:42:25 AM »
I always thought of Motul 800 as a really good oil.I remember factory Kawie using it back in the day in the supercross and motocross seasons.When I say "back in the day",it was the late 80's to mid 90's that I remember seeing them using it....whether they still do,I don't know.You would hope if they're using it, it's gotta be good.
« Last Edit: August 04, 2012, 11:44:22 AM by Foxx4Beaver »
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline meangreen500

  • Jr. Member
  • **
  • Posts: 32
Re: What 2-Stroke oil do you use?
« Reply #88 on: August 21, 2012, 03:01:56 PM »
Redline 70 to 1 very little smoke, fuel half 100 half 110. runs great
Logged

Offline 2-Stroke Tom

  • Full Member
  • ***
  • Posts: 160
Re: What 2-Stroke oil do you use?
« Reply #89 on: August 22, 2012, 02:42:20 PM »
I use Bel Ray H1-R for all my 2-strokes (40:1 for my KX500) now. I've put quite a few miles on my Ex Team Green KX500, and the compression still checks great and the piston looks good just from inspecting from the exhaust chamber and intake ports. When I grew up racing, me and just about everyone I knew in District 37 was using Golden Spectro at 40:1. I did a lot of two stroke rebuilding and we decided to go with Golden Spectro based on the engines we kept taking apart. I think any good name brand two-stroke dirt bike oil will due as long as you are mixing at the recommended ratio.
Logged
Pages: 1 ... 4 5 [6] 7 8 9   Go Up
« previous next »