Author Topic: What 2-Stroke oil do you use? (Read 60772 times)

Rowdy-Yates · « **on:** October 08, 2004, 01:20:34 AM »

What 2-Stroke oil do you guys use? I use Blenzall 32/1. I was reading a diff forum and a guy was saying not to use a castor based oil. Unless you like to rebuild your engine a lot. Why would he say that?

machine · « **Reply #1 on:** October 08, 2004, 02:59:09 AM »

I've always used Maxum 927 with great luck?

Great question though? I would like to know what others are useing too!!!

machine · « **Reply #2 on:** October 08, 2004, 03:07:36 AM »

BTW; I run 40:1

gowen · « **Reply #3 on:** October 08, 2004, 03:15:59 AM »

Just started a few months back, 50:1 with Bel-Ray MC1. I was running 32:1 with Klotz Supertech (cylinder and PV's are clean as a whistle (almost)) which is 20% castor and never had any problems.

gwcrim · « **Reply #4 on:** October 08, 2004, 03:40:43 AM »

Mobil 1 MX2T @ 40:1. But for the sake of the newly arriving KX85, I'll probably change the mix @ 32:1.

Anyone have any troubles with MX2T?

Folke · « **Reply #5 on:** October 08, 2004, 03:52:59 AM »

Maxima 927

mikesmith · « **Reply #6 on:** October 08, 2004, 06:24:57 AM »

Maxima Super-M at 40:1.

Paul · « **Reply #7 on:** October 08, 2004, 05:19:41 PM »

Quote from: mikesmith

Maxima Super-M at 40:1.

RexRob · « **Reply #8 on:** October 09, 2004, 12:35:39 AM »

Bel Ray H1R 40:1

KXcam22 · « **Reply #9 on:** October 09, 2004, 04:26:11 AM »

I raced for years with MC1 at 85:1. I am running H1R at 60:1 right now but am thinking of returning to MC1 at 60:1 since I think the H1R smokes too much. Cam.

Rowdy-Yates · « **Reply #10 on:** October 09, 2004, 06:56:21 AM »

85 to 1 why not use straight gas?

gowen · « **Reply #11 on:** October 09, 2004, 07:38:10 AM »

I started using MC1 because Cam recommended it and I couldn't be more happy with it. Great stuff.

Twist-a-grip · « **Reply #12 on:** October 09, 2004, 01:07:13 PM »

Yamalube2-R @40:1

Rowdy-Yates · « **Reply #13 on:** October 09, 2004, 06:18:27 PM »

Hmmm Bel Ray MC1 i think that is what i used 10+ years ago. Post a pic. does the bottle have blue writing?

KXcam22 · « **Reply #14 on:** October 10, 2004, 03:58:05 AM »

R-Y,
Yeah 85:1 used to be the recommended ratio for MC1 on the bottle. There is another thread in here with a similar topic where I this explained further. I quit using the 32:1 type rich ratios when synthetic oil came out. No oil failures since! Hey, my yamaha outboard uses 100:1. Remember that leaner ratios (as long as there is enough oil to lubricate properly) makes your bike run cooler since oil burns hotter than gas. MC1 is the white bottle with blue writting, good stuff. My '92 still has the original top end and I am just now noticing a minor decrease in compression (winter rebuild time). I think most of the newer synthetic oils nowdays are pretty good. Just have to pick a good one and stick with it. MC1 is my choice. Cam.

Author Topic: What 2-Stroke oil do you use? (Read 60772 times)

Rowdy-Yates

Folke

mikesmith

RexRob

Rowdy-Yates

Twist-a-grip

Rowdy-Yates