« previous next »
Pages: [1]   Go Down

Author Topic: hard to get hot  (Read 1904 times)

0 Members and 1 Guest are viewing this topic.

Offline fluffy

  • Full Member
  • ***
  • Posts: 78
hard to get hot
« on: November 06, 2012, 01:07:55 PM »
i have a 89 kx500 it runs good but takes forever to get to operating temp. a couple of times i almost had a cold seize.i dont know what the other owner used for a piston,but i guess it doesnt get hot as fast as the cyl. its comming apart shortly,so what should i look for. thanks for any ideas.
Logged

Offline 81cr450

  • Hero Member
  • *****
  • Posts: 887
Re: hard to get hot
« Reply #1 on: November 06, 2012, 02:31:32 PM »
Sounds like jetting. What you running
Logged
if I only had a pair, I could actually ride this thing

& to the people I like  FYYFF

Offline fluffy

  • Full Member
  • ***
  • Posts: 78
Re: hard to get hot
« Reply #2 on: November 08, 2012, 11:31:29 AM »
stock jetting, i did change base gasket and head gasket when i first got it. base gasket was torn when i bought the bike. after about 10 min, it gets warm and does run good.
Logged
Pages: [1]   Go Up
« previous next »