Author Topic: 2001 KX500 Kawasaki Supermoto  (Read 326324 times)

0 Members and 1 Guest are viewing this topic.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2001 KX500 Kawasaki Supermoto
« Reply #285 on: July 20, 2013, 02:36:03 AM »
It's amazing what a inch of seat height does. When I sit on it, it feels like a low rider :-o
You should come on up and take it for a spin.
Wheel color, why worry, rattle cans are cheap  :evil:
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2001 KX500 Kawasaki Supermoto
« Reply #286 on: July 22, 2013, 07:55:47 AM »
I was asked how I got the frame guard and the stand to work together since one interferes with the other.
First, I temporarily mounted the guard on the frame.
Then I took the stand, laid it against the guard and marked the guard.



Then I cut out the section that was interfering from the frame guard (Didn't do the best cut on it).



That left a small piece of aluminum left from the guard.
I used that small piece as a shim for the stand and mounted it using the bolts provided.
Yes, I drilled a hole through that small piece so it mounts flush with no wiggling around..

Thanks goes to those who gave me info or tried to get info about the best way to do this (Motorrad, Alward25)..
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: 2001 KX500 Kawasaki Supermoto
« Reply #287 on: July 22, 2013, 08:40:00 AM »
(Didn't do the best cut on it).

not the best cut?....d**n...looks like it was meant to be there in the pic on the previous page....better than I'd probably do.
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2001 KX500 Kawasaki Supermoto
« Reply #288 on: July 30, 2013, 12:33:35 PM »
It will work but I could have done better...
Ordered a non o-ring chain today.
It should help reduce tire wear  :lol:
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Motorrad

  • Guest
Re: 2001 KX500 Kawasaki Supermoto
« Reply #289 on: July 30, 2013, 02:42:54 PM »
Lots of HP to be found or lost in a O-ring chain

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2001 KX500 Kawasaki Supermoto
« Reply #290 on: July 30, 2013, 03:17:49 PM »
What do you recommend?
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2001 KX500 Kawasaki Supermoto
« Reply #291 on: July 31, 2013, 11:13:38 AM »
Now I can stop...  :lol:



Motorrad, any recommendations on the chain?
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Motorrad

  • Guest
Re: 2001 KX500 Kawasaki Supermoto
« Reply #292 on: July 31, 2013, 11:34:33 AM »


Motorrad, any recommendations on the chain?

Yup

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2001 KX500 Kawasaki Supermoto
« Reply #293 on: July 31, 2013, 12:17:19 PM »


Motorrad, any recommendations on the chain?

Yup

Sweet, what will it cost me?

I have a nice piston to trade...
« Last Edit: July 31, 2013, 12:25:21 PM by sandblaster »
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2001 KX500 Kawasaki Supermoto
« Reply #294 on: July 31, 2013, 04:54:19 PM »
No good?
How about a nice shift cam arm?
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2001 KX500 Kawasaki Supermoto
« Reply #295 on: August 01, 2013, 02:33:24 AM »
Hmmmm..... Free candy?

The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2001 KX500 Kawasaki Supermoto
« Reply #296 on: August 01, 2013, 02:49:57 AM »
DID claims to have the lowest friction..

http://www.didchain.com/enduroChains.html

Others make the same claim on the DID:

http://sprocketcenter.com/index.php/d-i-d-520erv3-heavy-duty-gold-x-ring-race-chain.html

Some other unnamed forums suggest the same.

What does Motorrad say?
« Last Edit: August 01, 2013, 03:40:30 AM by sandblaster »
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Pmcg

  • Sr. Member
  • ****
  • Posts: 352
Re: 2001 KX500 Kawasaki Supermoto
« Reply #297 on: August 01, 2013, 05:19:15 AM »
I used sprocket center for everything. Their prices are though to beat and great customer service.

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 2001 KX500 Kawasaki Supermoto
« Reply #298 on: August 01, 2013, 06:32:32 AM »
Thinking about making a sprocket spacer such as was done by Motorrad...
But, I'm limited for machine tools...
So, I will have to go the poor man route  :-(







I may actually have to have it surface ground to the correct thickness but this will give me a start...
« Last Edit: August 01, 2013, 08:01:39 AM by sandblaster »
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Motorrad

  • Guest
Re: 2001 KX500 Kawasaki Supermoto
« Reply #299 on: August 01, 2013, 11:10:50 AM »
I like mine better...




X-ring

Or if you want true unlimited HP. 

Non o-ring "diamond" chain.    Being your on street with this bike... May want to consider it

Also.  Power to be found in chain lube ;)
« Last Edit: August 01, 2013, 11:13:00 AM by Motorrad »