« previous next »
Pages: [1]   Go Down

Author Topic: Crankshaft seal?  (Read 2729 times)

0 Members and 1 Guest are viewing this topic.

Offline HSC Racing

  • Jr. Member
  • **
  • Posts: 13
Crankshaft seal?
« on: September 03, 2012, 10:57:29 PM »
Oil is leaking out from around the crankshaft and I'm assuming it's the seal.  Can that seal be replaced without splitting the case, and if so, how difficult is it?  Thanks, Greg
Logged

Offline DoldGuy

  • Hero Member
  • *****
  • Posts: 1,198
Re: Crankshaft seal?
« Reply #1 on: September 04, 2012, 12:12:27 AM »
Crank seals are captive.....have to be installed from the inside....cases need to be split.
DoldGuy
Logged
Its Never too Late to Have a Happy Childhood!

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: Crankshaft seal?
« Reply #2 on: September 04, 2012, 07:40:32 AM »
If you have'nt already done so...now would be the time to replace ALL the bearings and seals while you have it apart,that way you won't have to tear it apart again sooner,rather than later...just a suggestion.
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline kkvslayer

  • Full Member
  • ***
  • Posts: 60
Re: Crankshaft seal?
« Reply #3 on: September 06, 2012, 05:32:31 AM »
correct me if  Im wrong but the stator side seal should be able to be changed without splitting the cases
Logged

Offline HSC Racing

  • Jr. Member
  • **
  • Posts: 13
Re: Crankshaft seal?
« Reply #4 on: September 07, 2012, 03:08:44 AM »
Quote from: kkvslayer on September 06, 2012, 05:32:31 AM
correct me if  Im wrong but the stator side seal should be able to be changed without splitting the cases

Sorry for the dumb question but what side is the stator side?
Logged

Offline tobys 2 strokes

  • Full Member
  • ***
  • Posts: 175
  • My #2 son
Re: Crankshaft seal?
« Reply #5 on: September 07, 2012, 03:56:41 AM »
The stator side is the flywheel side.
Both sides are captured you have to split the cases.
Logged
Pages: [1]   Go Up
« previous next »