« previous next »
Pages: [1]   Go Down

Author Topic: 89-04 engines  (Read 6995 times)

0 Members and 2 Guests are viewing this topic.

Offline supercub

  • Jr. Member
  • **
  • Posts: 16
89-04 engines
« on: July 13, 2012, 04:04:19 AM »
Sorry if this has been discussed before, I did a search but couldn't find a difinative answer. Are the 89-04 engines pretty much identical? If there is some differences what are they? Thanks for all insight.

Logged

Offline dave916

  • Hero Member
  • *****
  • Posts: 546
Re: 89-04 engines
« Reply #1 on: July 13, 2012, 09:43:48 AM »
some 89 had smaller flwheel,
there are few slight differance in stator plates,flwheels , some stator plates have mounting holes for lighting coil
there pretty much identical ,may be a slight differance in head compression E1/E2 casting
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 89-04 engines
« Reply #2 on: July 13, 2012, 11:38:07 AM »
Essentially the motors are the same.
Shift shaft changed in 94 to a larger diameter.
Shift lever changed in 94 to a larger diameter.
Stators were the same from 89-91, Changed in 92-96, changed again 97-04.
Fly wheels 86-89, changed 90-91, changed again 92-04.
I have head that the heads were different from the E-1 casting to the E-2 but I have not found any difference.
If someone has specs that say otherwise I'd like to see it so I can update my info:
http://www.oem-cycle.com/KAWASAKIKX500BIKEID.shtml
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline supercub

  • Jr. Member
  • **
  • Posts: 16
Re: 89-04 engines
« Reply #3 on: July 15, 2012, 01:29:22 AM »
Thanks for the info so far. Does anyone have , or know where to find a "master list" of all the 500 engine parts with OEM part numbers for rebuilding?
Logged

Offline allan1353

  • Jr. Member
  • **
  • Posts: 29
Re: 89-04 engines
« Reply #4 on: July 16, 2012, 06:08:21 AM »
Didn't they also change to a bigger kick starter  shaft in 94 ?
Logged

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 89-04 engines
« Reply #5 on: July 16, 2012, 11:40:52 AM »
According to the book, the shaft is the same from 85-04. P/N - 13066-1056

Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline allan1353

  • Jr. Member
  • **
  • Posts: 29
Re: 89-04 engines
« Reply #6 on: July 16, 2012, 11:51:58 AM »
My bad sorry.
Logged

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: 89-04 engines
« Reply #7 on: July 16, 2012, 11:54:24 AM »
Quote from: allan1353 on July 16, 2012, 06:08:21 AM
Didn't they also change to a bigger kick starter  shaft in 94 ?

When I broke my kicker on my 95,I borrowed my buddies 86 kicker,and it went right on with no problems.
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 89-04 engines
« Reply #8 on: July 16, 2012, 12:54:31 PM »
Yeah they make a small design change and you get a different part number.
Since the shafts are the same just about all the years of kickers will fit on the shaft.
The only real potential problem is chassis design changes on the earlier models.
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline don46

  • Hero Member
  • *****
  • Posts: 1,140
Re: 89-04 engines
« Reply #9 on: July 17, 2012, 03:46:13 AM »
There was a change to the kickstarter, may not have changed part number but the design changed. the newer design is much beefier in the area where the AL and steel meet. I assumed that they were a different part number, but maybe not
Logged
Live today, for tomorrow may never come

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 89-04 engines
« Reply #10 on: July 17, 2012, 03:57:45 AM »
Yep, I have not updated my interchange page online but here is the info on the kick lever:
FITS 98-04 KX500 - 13064-1201
FITS 92-97 KX500 - 13064-1165
FITS 88-91 KX500 - 13064-1134
FITS 87 KX500 - 13064-1130
FITS 85-86 KX500 ? 13064-1118
FITS 75 KX400, 79-82 KDX450, 80-81 KX250 KX420, 83-84 KX500
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: 89-04 engines
« Reply #11 on: July 17, 2012, 04:39:31 AM »
Quote from: don46 on July 17, 2012, 03:46:13 AM
There was a change to the kickstarter, may not have changed part number but the design changed. the newer design is much beefier in the area where the AL and steel meet. I assumed that they were a different part number, but maybe not


This would be the difference....quite substantial.


Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 89-04 engines
« Reply #12 on: July 17, 2012, 04:43:08 AM »
What two years do you have pictured?
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline Foxx4Beaver

  • Hero Member
  • *****
  • Posts: 8,952
  • James Stewart DID NOT invent the scrub!!..JoJo
Re: 89-04 engines
« Reply #13 on: July 17, 2012, 04:50:34 AM »
Quote from: sandblaster on July 17, 2012, 04:43:08 AM
What two years do you have pictured?


The new beefier one on the left,from what I was told...is for 88-04,it's on my 95....PN#13064-1201.

The old one is just a spare that supposedly came off a 97.
Logged
Excuse me, ma'am...but you've got extremely nice legs!!!...what time do they open???                                                                                                               https://www.youtube.com/watch?v=n8tCgN3aryQ
Pages: [1]   Go Up
« previous next »