One i first went about to fix the kx250 05/08 ill handing frame ,i lengthen the pull rods by 3mm ,same as pc link,it improve it a bit so i knew we were heading in the right direction.Next step was to alter frame from 26 to26.5 degrees,bingo" no more loosing the front end half way around a corner ,and can power slide with confidence.And the best thing is you can fine tune with different length pull rods.See Kawi made a mistake in my line of thought , they went from 27 degrees and 113mm trail in 04 to 26 degrees and 105mm trail,in 05 to 08 .Back to back test i have done between std and modded , and i can tell you the std one is a accident waiting to happen.In giving the 05 to 08 less trail you give it less grip around a corner.Less offset in the triple clamps would of helped as well ,but as far as i know kawi didn;t change offset between 04 to 05/08.they just steepen the head angle.No wonder team green used offset bearing cups on that model.As for adam bike it looks to be a weapon,im confident he will be impressed with this mod as i have for over a year.It got to the stage were i was going to sell it because of this fault?Not now i will keep it for as long as i am able to ride dirt bikes. KXDINO.
