« previous next »
Pages: [1]   Go Down

Author Topic: 1993 K5 motor into a 1996 KDX steel frame  (Read 3912 times)

0 Members and 1 Guest are viewing this topic.

Offline ID KX500

  • Hero Member
  • *****
  • Posts: 626
  • Life, Liberty, and The Pursuit of Happiness
1993 K5 motor into a 1996 KDX steel frame
« on: December 29, 2011, 11:38:06 AM »
I'm considering putting a 1993 KX500 motor into a 1996 KDX steel frame. Any body have any comments,,, good, or bad. The frame seems to be the same as a KX250 except for the attached sub-frame. I'm not jumping right on this project,, I have several projects in head of this,,,just trying to line up my ducks.
Logged
"Endeavor to persevere."

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 1993 K5 motor into a 1996 KDX steel frame
« Reply #1 on: December 29, 2011, 01:33:07 PM »
That would be an interesting conversion.
The only draw backs I can see is the suspension and possibly handling.
With conventional forks and a weaker rear I wonder how it would perform?
You could re-spring and re-valve or use a USD set up but then you have additional expense.
I would consider selling the KDX and the chassis parts from the KX500 and then buy a newer KX250 with a blown engine.
As always the newer the donor bike the longer you will be able to buy aftermarket as well as OEM parts.
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline ID KX500

  • Hero Member
  • *****
  • Posts: 626
  • Life, Liberty, and The Pursuit of Happiness
Re: 1993 K5 motor into a 1996 KDX steel frame
« Reply #2 on: December 29, 2011, 02:52:38 PM »
Thanks Sandblaster, I do at this point plan to use the suspension from the KX500 re-valved,,, I do believe that is the first thing I will try to confirm for the reasons you site. Planning to add alwards stator and be street legal. Going for a somewhat dual sport trail worthy bike.
Logged
"Endeavor to persevere."

Offline sandblaster

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 8,271
    • OEM-CYCLE QUALITY USED PARTS
Re: 1993 K5 motor into a 1996 KDX steel frame
« Reply #3 on: December 29, 2011, 05:06:45 PM »
That would be a cool project.
Keep us posted.
Logged
The four stroke engine: That's one stroke for producing power and three for wearing the engine out.

Offline ID KX500

  • Hero Member
  • *****
  • Posts: 626
  • Life, Liberty, and The Pursuit of Happiness
Re: 1993 K5 motor into a 1996 KDX steel frame
« Reply #4 on: December 29, 2011, 06:07:49 PM »
Quote from: sandblaster on December 29, 2011, 05:06:45 PM
That would be a cool project.
Keep us posted.

Will do
Logged
"Endeavor to persevere."
Pages: [1]   Go Up
« previous next »